$6.99
New
Home › Templates › Resort › Cornice
Resort dashboard template
Cornice Ski Resort Operations Dashboard Template
Cornice is a single-file HTML mountain ops dashboard for a ski resort: lift status, wind holds, patrol terrain, snowmaking, and gate scans.
Cornice is a ski resort operations dashboard template built as one self-contained HTML file with a light Snowfield theme. It models Cornice Peak (1,940 m base, 2,860 m summit, 11 lifts, 68 runs) at the 07:42 morning report, and answers the operations director's opening question: what can we open, and when. The file runs in any browser and draws every chart as inline SVG.
Cornice arranges five views that follow the morning. Mountain renders an elevation cross-section with the lift network overlaid, a snow stake at +11 cm in 24 hours, and summit versus base conditions: -12°C with 68 km/h gusts at the top against -6°C and clear at the village. Lifts carries a status board with gust and uptime per lift plus a wind-hold gauge. Patrol lists 59 of 68 runs open with avalanche danger considerable above treeline. Snowmaking shows 41 of 58 guns running at 78% plant load. Passes counts gate scans up 8.4% against the same Thursday last season.
What is inside Cornice
- Elevation cross-section from 1,940 m base to 2,860 m summit with the lift network overlaid
- Summit and base condition cards: -12°C, 68 km/h gusts, and -23°C windchill at the top against -6°C and clear at the village
- Snow stake panel with a +11 cm 24 hour reading from plot 4 at 06:00
- Lift status board table with lift, type, status, top-station gust, and uptime today across 11 lifts
- Wind-hold gauge at 68 km/h against thresholds: exposed lifts at 60, chairs at 80, gondola at 90
- Open terrain by rating: 18 of 18 green, 27 of 31 blue, 14 of 19 black, avalanche danger considerable above treeline
- Patrol incident log since 06:00 with run, type, patroller, and status, plus a morning sweep checklist
- Snowmaking panel with 41 of 58 guns, a 24 hour wet-bulb chart against the -2.5°C viable line, plant pressure, and gun-hours by zone
- Passes view with hourly scans at 14 scan points, product mix (58% season pass, 29% day ticket, 13% multi-day), and season-to-date visits of 291,400
Specifications
| Format | Single self-contained HTML file; zero dependencies, no build step |
|---|---|
| Theme | Snowfield |
| Mood | Light |
| Category | Resort |
| Price | $6.99, one-time |
Who Cornice is for
The Mountain and Lifts views serve a mountain operations director at 07:42: 8 lifts open, 2 on wind hold, 1 closed, and the wind-hold gauge at 68 km/h keeps the t-bars parked until the ridge drops under 60.
The lift status board serves a lift operations lead: gusts at each top station and uptime today per lift, with holding rules beside them (chairs at 80 km/h, gondola at 90).
The Patrol view serves a patrol director: green terrain is 18 of 18 open, blue is 27 of 31 with 4 grooming, black is 14 of 19 with 5 on avalanche hold, and the incident log since 06:00 lists 5 entries from wind-slab assessment to transported collision.
The snowmaking panel serves a snowmaking manager: wet-bulb temperature against the -2.5°C viable line, water at 21.4 bar and air at 6.8 bar inside target, and gun-hours by zone against the Race Arena certification date of February 20.
The first-tracks corral panel serves a guest services lead: 312 guests in the Summit Flyer maze at 64% capacity, clearing 22 minutes after the 08:45 gates.
When to reach for it
Cornice fits operations software for a ski resort, bike park, or any lift-served venue. It replaces the morning radio net summary and the grease-board lift map.
Cornice suits the pre-open hour: the screen orders the decisions from weather and snow stake to lift holds, terrain by rating, gates, and corral counts.
Cornice replaces the end-of-day visitation spreadsheet: hourly scans across 14 scan points, the season pass versus day ticket mix, and cumulative visits against last season are already charted.
Cornice beats a generic admin template when vocabulary matters: wind-hold thresholds, wet-bulb limits, cornice control entries, and corral counts come with the file.
Frequently asked questions
Does Cornice pull live weather or lift data?
No, Cornice does not pull live weather or lift data. Gust readings, the snow stake, lift statuses, and scan counts are sample values in the file. Real anemometer, lift control, or gate feeds can replace them without changing the design.
Can I adjust the lift count and wind thresholds?
Yes, you can adjust the lift count and wind thresholds. The 11 lifts, types, and hold thresholds (60, 80, 90 km/h) are values in the file, so a resort with 6 lifts or different rules edits those entries directly.
How does the wind-hold gauge decide holds?
The wind-hold gauge decides holds by comparing the ridge gust against three thresholds: exposed lifts hold at 60 km/h, chairs at 80, the gondola at 90. At the sample 68 km/h the exposed lifts hold, and the logic sits in the file's script.
Is Cornice usable for a summer bike park season?
Yes, Cornice transfers to a summer bike park season in structure: lift status, terrain by rating, patrol log, and gate scans apply to lift-served biking. Mountain and Snowmaking are winter-specific, so you hide snowmaking and re-label condition cards with markup edits.
